Hafele SLIDO Design 80-M concealed softstop kit

Model: Hafele SLIDO Design 80-M softstop timber sliding door gear
Application: Timber doors up to 80kgs each
Door weight: Up to 80kgs
Door width: Minimum 800mm wide
Door thickness: 30mm to 45mm
Door size: 800mm (32″) to 1800mm (71″)
Finish: Silver

With no visible track, the rolling gear completely concealed behind the door and on the floor, the SLIDO Design 80-M gives a clean and minimal way of adding a sliding door to your room. Comes with softstop at both ends.

Paypal-Pay-Later

Kit comprises:

  • 2 x Bottom roller carriages
  • 1 x Top roller guide
  • 1 x Top rail (1100mm or 1800mm)
  • 2 x Softstop
  • 1 x Bottom guide
  • 1 x Bottom track (morticed into bottom of door)

    Features:
    No visible aluminium track
    Single or double softstop
    Bottom rollers and top roller guide
    Wheels on roller bearings
    Adjustable stop
    Full fixing kit supplied
    Minimum door thickness of 30mm
    Minimum door width of 800mm
    Maximum door weight 80kgs
    Kit suitable for hard floors only (aluminium floor strip for soft floors sold separately)


    Specification:

    The SLIDO Design 80-M is a completely concealed track system with softstop at both ends. The system uses a concealed top track that is attached to the back of the door with two bottom rollers to support the weight of the door at either end. The bottom rollers do not need any track as they just roll on the hard floor, and a morticed floor guide helps keep the door running straight.

    The top roller carriage is designed to take some of the weight of the door and keep the door in place whilst the bottom rollers take the rest of the door weight. The top track is partially morticed into the top of the door (see cross section diagram) and has a softstop brake at either end.

    The SLIDO range of sliding door gear offers superior running performance due to low friction nylon wheels and roller bearing axles.

    How large does my door need to be?
    The door should be about 6cm (2.5″) taller than the clear opening.  In order to achieve the full clear opening of your doorway, your door will need to be at least 21cm (8.5″) wider than the opening itself.  At a minimum, the door should be at least 10cm (4″) wider than the opening, but this will not enable a full clear opening width.

    Floor guide:
    Suitable for a maximum door weight of 80kg, the timber sliding door kits come complete with a standard fixed floor guide, fixed to the floor next to the door frame, it runs concealed in a track morticed into the door leaving the threshold free from obstructions.

    Double bi-parting doors:
    For double doors order two units, one for each door.

    Note:
    This system is designed to run on a hard floor. For soft or carpeted floors please purchase the running track for soft floors.

    Kit Contains

    Top and bottom tracks

    Top and bottom tracks

    Wall mounted running gear

    Wall mounted running gear

    Softbrake

    Softbrake

    Bottom roller

    Bottom roller

    Buy Now

    Sliding door kits, complete with fixings:

    Model Description Stock Price Price (ex-vat)
    940.59.002 Slido 80-M for doors between 800mm - 1100mm wide In stock £434.90 £362.42
    940.59.003 Slido 80-M for doors between 1100mm - 1800mm wide In stock £463.70 £386.42

    Components

    Model Description Stock Price Price (ex-vat)
    940.59.802 Slido Running track for soft floors, 2200mm In stock £48.02 £40.02
    940.59.803 Slido Running track for soft floors, 3600mm In stock £80.33 £66.94