Frameless Glass Sliding Kit Guide

In this guide we will help you choose the right sliding kit based on door weight, finish, and soft-close options for your frameless glass door.  We will also try to help answer some of the questions you might have about them.

Can I cut the track down?

Yes.  These kits have an aluminium or stainless steel top track that can easily be cut to size on site with a hacksaw.  We always recommend using a mitre block for this to ensure you get a clean square edge but it is not necessary.

Are the tracks all the same?

No, there are many different types and sizes of tracks. The aluminium top hung tracks are normally C shaped and completely contain the wheels, such as the Excellence 100 system.  We have a stainless steel system, such as the Projeto 150G where the parts are on display and the wheels run on top of the track.  We also have the Hatch system where the bottom rolling wheels are in the carrier that holds the glass.

What thickness of glass do I need?

Most of our standard door kits will take either 8mm, 10mm or 12mm thick toughened glass.  Please check the specification of each kit as this can vary.  The Hatch kits for display cabinets or reception hatches take 6mm glass.

What is the maximum size of door I can use?

We have kits for all sizes of doors but the biggest kit we have in stock will take a sheet of glass up to 3m wide by 3m tall and up to 300kgs in weight. This is the SV-A300 system. This kit is engineered for exceptionally heavy doors, with a capacity of up to 300kg. In contrast, the vast majority of the kits we supply are for doors that weigh between 40kg and 80kg.

Does the glass need to be drilled for the fixings?

Most of our kits do not need any glass drilling apart from any handle you might want to put on it.  The only kit we currently sell that does require any glass drilling is the iMpero pocket door kit.  This requires a safety pin in the glass clamp to ensure the glass does not fall out.

Does the track need to overhang the door at the end?

No, when using with either the standard stop or the Soft Brake units all the operating parts are contained in the width of the door.

Is there a full length track on the floor?

The floor guide on all these systems is a short metal or plastic component that is U shaped and the door moves through this guide.  The inside of the guide is lined with either plastic or rubber to ensure the glass is not scratched.  We do have full length floor guides where in the inside of the track has a brush strip lining.

How do you stop the doors hitting the frame or each other?

All of the kits come with adjustable stops in or on the track but you can also get some kits with Soft Brake.  This dampens the speed of the door in the last 50mm (2”) of travel and then pulls the door into the final position.

Are there any disadvantages to having Soft Brake?

Not all the kits have the option of Soft Brake.  If you do wish to use Soft Brake it is better on an aluminium track system where the Soft Brake is contained in the track allowing the activation bar to engage every time. Some kits have the Soft Brake on the back of the track and you need to ensure the doors line up correctly each time.  This can be somewhat unpredictable

Can I have fixed glass screens next to the sliding door?

Yes, you can either have the fixed panel parts integrated into your sliding track kit or we can provide just the rails to hold a fixed section of glass.  Having the fixed panel integrated into the sliding track allows the sliding and fixed panels to get closer together making them easier to seal with our glass sealing options.

We offer a range of pocket doors kits from just the track to the full systems.  For a summary of the kits we provide please see the list below.  For more details or more information please e-mail info@sliding-doorstuff.co.uk , message us in the box on the bottom right or call us on 01626 335500.

In summary our systems are:

SAHECO Excellence 60/100 sliding door gear for frameless glass

Excellence 60/100 :

A good preforming simple system with a 60kg or 100kg weight capacity.

GEZE Perlan 140G for frameless glass sliding doors

Perlan 140 :

A heavier duty Germany made kit with simple stops for doors up to 140kg.

saheco-compact-x-frameless-glass-sliding-door-gear-3-300x300

BLOQ:

A neat and fully concealed system with the glass housed within the track creating a very clean, minimalist appearance.  Soft Brake can also be added to enhance the performance.

SAHECO SV-A200 heavy duty sliding door gear for frameless glass

SV-A200:

A system designed for heavier doors.  Tracks up to 6m long.

SAHECO SV-A300 sliding door gear for frameless glass

SV-A300 :

A system designed for the heaviest doors. Tracks up to 6m long.

Stainless steel system for glass doors - Projeto 150G

Projeto 150G :

A stainless steel top hung kit with great aesthetics and smooth functionality.

Bottom rolling kits

Terra 120G :

A bottom roller stainless steel kit for where you want the load to be taken on the floor.

Hatch:

A simple system for display cabinets or reception hatches.

Do you need assistance? Then contact us...

If you have any questions or need help with your purchase, please call us on: 0207 099 2822 or email info@sliding-doorstuff.co.uk