Pocket Door Kit Guide
Pocket doors offer a stylish, space-saving alternative to traditional swinging doors, but choosing the right kit comes down to understanding your door weight, wall thickness, and finish options before you start building.
Whether you're after a simple, cost-effective solution for a small cloakroom or a deluxe fire-rated kit for a grand double doorway, there's a pocket door system to suit. This guide answers the questions we're asked most often, helping you pick a kit that's rigid, reliable, and right for your project.
What do I get in the kit?
In a pocket door kit you normally get the track, rollers and some method of building the wall for you that you just need to attach the plasterboard to. The types of wall reinforcement used to make the wall vary from simple uprights on the cheaper kits, to uprights and cross bars on the mid level kits to full cassette systems on the high end units.
How big do I need the opening to be to fit in a pocket kit?
All the kits vary but as a simple rule you need an opening width of twice the door width plus 25mm along with the door height plus 114mm. You do need to check the exact sizes for the kit you are looking at but this guide will allow you to see if fitting a pocket door is possible.
What size stud thickness is needed for the surrounding structure?
All the kits vary. You can get kits for 75mm (3”) thick stud but with a wall so thin these kits can often be less rigid. Most kits are designed for 102mm (4”) CLS stud and the high end kits can use straight 102mm (4”) stud.
Can I cut the kit down?
Some pocket door kits are adjustable and so will be suitable for many door widths but some are a fixed sizes. Both the cheaper kits such as the ISCA and Hideaway kits and the deluxe iMpero kits are adjustable within a size range whereas the mid level kits are for a fixed door size and thickness.
Is there a full length track on the floor?
The floor guide on all these systems is a short metal or plastic component that has a fin projecting upwards. The bottom guide is no longer than 40mm and sits under the door and should never be seen as the door is always on top of it. The guide is placed at the open end of the pocket allowing a clean and unobstructed threshold.
Can I add Soft Brake?
Yes, most of the pocket door kits have an option for fitting Soft Brake. The Soft Brake mechanism is normally attached to the top of the door leaf allowing easy access if required without having to remove the entire pocket. We recommend only fitting a Soft Brake on the closing side where the door moves across the opening.
Why do you not recommend putting a Soft Brake inside the pocket?
You can fit a Soft Brake where the door moves into the pocket but this brings its own issues. A practical consideration is that with the Soft Brake the spring adds resistance to moving the door therefore getting the door out of the pocket can be hard, especially if you only have a small end pull to use. Also any issues with the Soft Brake when installed on the opening action can require the pocket needing to be removed to gain access.
What is the maximum thickness for the doors I can use?
Most of the kits work well with 18mm thick material but they can also be used with thicker material. The SF-25 and SF-51 have individual tracks so you can place these as needed. The SF-30 and SF-53 can come with double track allowing for a maximum door thickness of 30mm or twin track that allows the tracks to be spaced as needed. Only the SF-47 has a fixed thickness size of 18mm or 19mm thick material.
What if I already have the stud and just need the track kit?
We have a page on our website just for this consideration. We have a basic system with the Excellence 100 kit, a midrange unit with the Perlan and our specially designed Removable Pocket Track kit. The Removable Pocket Track kit uses an outer fixed track and an inner removable track so you can always get access to the rollers or Soft Brakes for adjustment or replacement without having to take the track or pocket down.
Do I get a timber finishing / Jamb kit with the system?
Not always. The deluxe iMpero kits come with a jamb kit included but the cheaper ISCA and Hideaway kits do not. We do have our own Universal timber jamb kits that are designed to be used on the ISCA, Hideaway and similar kits to give that professional finish. Our timber jamb kits also come with brush strips and seals.
Can the kits be used with a fire door for fire protection?
We do have a fire rated pocket door kit with the iMpero FD30 kit. This can be used for single doors up to 1500mm wide and up to 2700mm tall. It can also be used for double doors where each door can be up to 926mm wide and 2400mm tall.
We offer a range of pocket doors kits from just the track to the full systems. For a summary of the kits we provide please see the list below. For more details or more information please e-mail info@sliding-doorstuff.co.uk , message us in the box on the bottom right or call us on 01626 335500.
In summary our systems are:
ISCA:
Basic cost effective full pocket kit without jambs
Basic cost effective full pocket kit without jambs but of better quality and rigidity.
Deluxe pocket door kit with timber jambs giving a smoother operation and a much more rigid wall construction.
Deluxe pocket door kit with a steel edge profile allowing a full architrave free look whilst giving a smoother operation and a much more rigid wall construction.
Deluxe pocket door kit with timber jambs and plasterboard profiles giving it an FD30 fire rating.
A jamb set with brush strips designed for use with the cheaper systems that do not come with their own jambs.
A sliding door track for when you want a simple track kit only for use with your own pocket.
A two track system with the outer track fixed and an inner removable track. Ideal for use with double Soft Brake and low head room brackets. With the additional benefit of being able to adjust or replace parts without having to break into your pocket.
Do you need assistance? Then contact us...
If you have any questions or need help with your purchase, please call us on: 0207 099 2822 or email info@sliding-doorstuff.co.uk