Aluminium Top Hung Sliding Door Kit Guide
Aluminium top hung sliding door kits are one of the most popular choices for internal doors, offering a smooth, reliable glide while freeing up valuable floor space that a swinging door would otherwise need. This guide is designed to help you determine which kit is right for your project, whether you're fitting a single door in a bedroom, dividing an open-plan living area, or creating a run of doors along a hallway.
There are a number of things to think about before you buy. The weight of your door is usually the deciding factor, as different kits are built to handle different loads, so it's worth knowing roughly how much your door weighs before choosing a system. You'll also want to consider how many doors you need on a single opening, since not every kit is designed to handle multiple doors in the same way. Beyond the practical side, looks matter too, and some kits have a slimmer, more discreet track, while others are designed to be more of a visual feature. Finally, the space you're working with, including ceiling height and wall clearance, can influence which system suits your room best.
Can I cut the track down?
Yes. The aluminium top hung sliding door kits feature a top track that you can easily cut to size on site using a hacksaw. We recommend a mitre block a clean square edge but it isn’t essential.
Are all the tracks the same?
No, there are many different types and sizes of tracks. If you are looking for small track then the P50 system has the smallest track we offer. The Excellence kits are a good compromise between size and performance whereas the Perlan offers superior performance but with a much bigger track size.
Can the wheels jump off the track?
With aluminium top hung sliding kits the wheels or roller carriages roll inside the track and so have limited vertical movement. The roller carriage can move slightly up and down but cannot come off of the track, so the door cannot fall off.
What length of track do I need?
You normally need to have the track twice the width of the door. For doors over 900mm wide, you can move the rollers in from the edge to reduce the track length while maintaining stability.
I have a heavy door, which kit do I need?
All of the sliding kits will have a weight rating such as 50kg, 60kg, 90kg, 140kg etc.. This is the tested weight rating for a single door on two rollers. Even if you are using more than one door on the same track, the weight rating per door does not decrease. Most kits have the weight rating in the name such as the Perlan 140 kit will take doors up to 140kgs.
How does the door stop / not come off the end of the track?
Aluminium top hung sliding kits use stops fitted inside the track, with either bumper stops or soft brakes on the rollers. You can position these stops anywhere along the tracks length to control where the door stops moving.
Soft brake vs bumper stop. What’s the difference?
Standard kits come with rubber bumper stops that catch and hold the rollers at the end of the door movement, such as the Excellence 60/100. Soft Brake kits use a spring and plunger mechanism integrated into the roller carriage, activated by a fixed pin in the track. This system features in kits such as Excellence 60 Soft Brake kit and Excellence 90 Soft Brake kit.
Are there any disadvantages to having Soft Brake?
Soft Brake units require the door to generate enough momentum in the door to activate properly, so each system has both a minimum and maximum recommended door weight. Being over the minimum weight gets the best action out of your system. The Soft Brake will still work if the door is under this weight but the action might not be clean and faultless. For example our Excellence 60 Soft Brake kit has a maximum weight of 60kg and a recommended minimum door weight of 25kgs for the best performance.
How do I cover the track to make it nicer looking?
Many simple tracks include edge fins that let you clip an aluminium pelmet directly onto the track. You can also fit clip-on brackets to the fins to support a wooden pelmet cover. Systems such as the P50 and Excellence systems use this design. Kits like the STAR 90 have a clean and finished look using a track and a concealed mounting bracket in silver and black options. This type of system does not require a pelmet.
Does the track need to overhang the door at the end?
No. Both the standard stop and Soft Brake units operate within the section of track directly above the door, so the door can stop flush with the track rather than extending past it.
Is there a full length track on the floor?
The floor guide on all these systems is a short metal or plastic component that has a fin projecting upwards. The bottom guide extends no more than 40mm, mounts beside the wall and stays hidden from view. As the door slides along it remains over the top of the bottom guide keeping it concealed. The guide sits to the side of the clear opening, creating a clean look and an unobstructed threshold.
Where can I use an aluminium top hung sliding door kit?
Aluminium top hung kits are best used in internal domestic and office environments. Ideal for doors into bedrooms, lounges, offices and store rooms. The kits are not fire rated so we recommend checking if you need Fire Rated doors before fitting these kits in a kitchen. If you need Fire Rated doors there are some different options available for you.
In summary our Aluminium top hung kits are:
A dependable, easy-to-fit solution for internal sliding doors, with tracks that can be cut to size on site and a range of weight ratings to suit lighter wardrobe-style doors right through to heavier statement doors. Whether you want a discreet track hidden behind a pelmet or a cleaner, exposed finish, there's an option to match your style, along with stop and soft brake choices to control how the door settles.
Below you'll find our full range of aluminium top hung sliding door kits, covering everything from compact, budget-friendly systems to heavy duty and soft close options. Each product page includes full specifications on weight capacity, track length and finish, so you can compare them side by side and find the right fit for your door and space.
Low cost basic system. Includes bumper stops and this system is designed for use with a pelmet.
Low cost basic system. Includes bumper stops and this system is designed for use with a pelmet.
A heavier duty German made kit with simple stops for doors up to 140kg. This can look nice with or without a pelmet.
A good performing system for doors up to 60kg each with Soft Brake at both ends of the doors which travel with plastic bodied rollers. This kit is designed for use with a pelmet.
A more robust system for doors up to 90kg each with Soft Brake at both ends of the doors which travel with metal bodied rollers. This kit is designed for use with a pelmet.
An aesthetically pleasing system for doors up to 90kg with Soft Brake at both ends. This does not need a pelmet and comes with low headroom brackets for the best look. Available in satin anodised aluminium or black finish.
A track system designed to be flush with the ceiling line giving a hidden clean look for a through ceiling design. For doors up to 90kg each with Soft Brake and low headroom brackets.
Do you need assistance? Then contact us...
If you have any questions or need help with your purchase, please call us on: 0207 099 2822 or email info@sliding-doorstuff.co.uk